EDDY CURRENT 4 NOTCH BLOCK (Inch Version)
EDDY CURRENT 4 NOTCH BLOCK (Inch Version) SURFACE REFERENCE BLOCK contain 4 EDM SLOTS DIMENSIONS: 4" (L) X 1" (W) X 0.125" (T) Notch Depth – 0.005", 0.010", 0.020", 0.060". (0.75" space between each notch) Notch Width – 0.005".
EDDY CURRENT 4 NOTCH BLOCK (Metric Version)
EDDY CURRENT 4 NOTCH BLOCK (Metric Version) SURFACE REFERENCE BLOCK contain 4 EDM SLOTS DIMENSIONS: 100mm (L) X 25mm (W) X 3.2mm (T) Notch Depth – 0.12mm, 0.25mm, 0.5mm, 1.5mm. (19mm space between each notch) Notch Width – 0.12mm.
-
12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
-
4 HOLES REFERENCE STANDARD
-
Custom 2 Bolt Hole Calibration Block
-
Custom TWO Bolt Hole Calibration Block
-
Custom TWO Bolt Hole With ONE Flaw Calibration Block
-
Custom 2 Bolt Hole with 1 Flaw Reference Block
-
Custom Bolt Hole Block
-
Custom 2 Bolt Hole Block
-
3 HOLE REFERENCE STANDARD BLOCK
-
5 HOLE REFERENCE STANDARD
-
12 HOLES REFERENCE STANDARD
-
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
-
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
-
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
-
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
-
12 BOLT HOLES REFERENCE STANDARD
-
Custom 4 Holes Calibration Standard
-
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
-
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
-
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
-
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
-
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
-
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
-
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
-
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
-
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
-
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
-
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
-
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
-
Custom Bolt Hole Calibration Block
-
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
-
TEN STEP WEDGE BLOCK
-
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
-
CUSTOM SURFACE CALIBRATION BLOCK
-
EDDY CURRENT SURFACE STANDARD BLOCK
-
EDDY CURRENT 4 NOTCH BLOCK
-
EDDY CURRENT 3 NOTCH BLOCK
-
EDDY CURRENT 5 NOTCH BLOCK
-
FOUR STEP WEDGE BLOCK
-
FIVE STEP WEDGE BLOCK
-
SURFACE EDM REFERENCE STANDARD BLOCK
-
AIRBUS TAP TEST TOOL
-
TWO STEP WEDGE BLOCK
-
SIX STEP WEDGE BLOCK
-
3 STEP WEDGE BLOCK
-
SEVEN STEP WEDGE BLOCK
-
SURFACE STANDARD BLOCK
-
EIGHT STEP WEDGE BLOCK
-
AIRBUS CALIBRATION BLOCK
-
AIRBUS MULTIDIRECTIONAL BLOCK SET
-
AIRBUS REFERENCE STANDARD
-
ATR REFERENCE STANDARD
-
CORROSION TEST PLATE
-
AIRBUS CALIBRATION BLOCK SET
-
AIRBUS MULTI HOLE REFERENCE STANDARD
-
SPLITTED CONICAL CALIBRATION STANDARD
-
BOEING REFERENCE STANDARD
-
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
-
WHEEL REFERENCE STANDARD
-
EDM REFERENCE STANDARD
-
3 HOLE REFERENCE STANDARD