SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 12.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 12.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 12.5mm in 1.0mm, 2.0mm, 4.0mm, 6.0mm, 7.5mm, 10.0mm and 12.5mm increments. 135mm (L) x 19mm (W) x 12.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 13.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 13.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 13.5mm in 0.75mm, 3.0mm, 5.0mm, 6.5mm, 9.5mm, 11.5mm and 13.5mm increments. 135mm (L) x 19mm (W) x 13.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.75mm – 2.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.75mm – 2.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.75mm to 2.5mm in 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm and 2.5mm increments. 135mm (L) x 19mm (W) x 2.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (7.0mm – 21.5mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 7.0mm – 21.5mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 7.0mm to 21.5mm in 7.0mm, 9.0mm, 11.5mm, 14.0mm, 16.5mm, 19.0mm and 21.5mm increments. 135mm (L) x 19mm (W) x 21.5mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.6mm – 5.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.6mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.6mm to 5.0mm in 0.6mm, 1.0mm, 1.5mm, 1.75mm, 2.5mm, 3.0mm and 5.0mm increments. 135mm (L) x 19mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (1.0mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 1.0mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 1.0mm to 6.25mm in 1.0mm, 1.75mm, 2.5mm, 3.5mm, 4.5mm, 5.25mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (0.5mm – 6.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 0.5mm – 6.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 0.5mm to 6.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm and 6.0mm increments. 135mm (L) x 19mm (W) x 6.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (4.75mm – 6.25mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 4.75mm – 6.25mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 4.75mm to 6.25mm in 4.75mm, 5.0mm, 5.25mm, 5.5mm, 5.75mm, 6.0mm and 6.25mm increments. 135mm (L) x 19mm (W) x 6.25mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (0.5mm – 5.0mm) BLOCK (METRIC VERSION) STAINLESS STEEL 304 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5mm – 5.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5mm to 5.0mm in 0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm increments. 120mm (L) x 20mm (W) x 5.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 20mm x 20mm. STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (12.5mm – 25.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 12.5mm – 25.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 12.5mm to 25.0mm in 12.5mm, 14.0mm, 16.0mm, 18.0mm, 20.0mm, 22.0mm and 25.0mm increments. 135mm (L) x 19mm (W) x 25.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 19mm x 19mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SEVEN STEP (20.0mm – 50.0mm) WEDGE BLOCK (METRIC VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 7 Step Calibration Block for thickness and linearity calibration 7 Step Calibration Block 20.0mm – 50.0mm. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 7 Step Calibration Block has steps starting at 20.0mm to 50.0mm in 20.0mm, 21.5mm, 22.75mm, 24.0mm, 25.0mm, 38.0mm and 50.0mm increments. 175mm (L) x 25mm (W) x 50.0mm (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 25mm x 25mm. MATERIAL: NICKEL. NOTE: For special alloy request by mail.