BOEING REFERENCE STANDARD (Metric Version)

BOEING REFERENCE STANDARD-1083-20 (Metric Version)

BOEING REFERENCE STANDARD-1083-20 (Metric Version) BOEING REFERENCE STANDARD 767 PT 6 51-00-16 PAGE 7 FIG 3. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 20mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1083-20 MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

BOEING REFERENCE STANDARD-1083-4 (Metric Version)

BOEING REFERENCE STANDARD-1083-4 (Metric Version) BOEING REFERENCE STANDARD 767, PT 6 51-00-16 PAGE 7 AND 777, PART 6 51-00-02 PAGE 8 FIG. 3. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 4mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1083-4 MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

BOEING REFERENCE STANDARD-1083-17.7 (Metric Version)

BOEING REFERENCE STANDARD-1083-17.7 (Metric Version) BOEING REFERENCE STANDARD 767 PT 6 51-00-16 PAGE 7 FIG 3. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 17.7mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1083-17.7 MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

BOEING REFERENCE STANDARD-1084-20 (Metric Version)

BOEING REFERENCE STANDARD-1084-20 (Metric Version) BOEING REFERENCE STANDARD ALL PT 6 51-00-16 FIGURE 3, PAGE 7. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 20mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1084-20 MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

BOEING REFERENCE STANDARD-1084-28.6 (Metric Version)

BOEING REFERENCE STANDARD-1084-28.6 (Metric Version) BOEING REFERENCE STANDARD ALL PT 6 51-00-16 FIGURE 3, PAGE 7. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 28.6mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1084-28.6 MATERIAL: 7075-T6 ALUMINUM. NOTE: For special alloy request by mail.

BOEING REFERENCE STANDARD-1084-30.5 (Metric Version) 2024-T3 ALUMINUM

BOEING REFERENCE STANDARD-1084-30.5 (Metric Version) 2024-T3 ALUMINUM BOEING REFERENCE STANDARD ALL PT 6 51-00-16 FIGURE 3, PAGE 7. Includes Test Report and Certificate of Conformance. OVERALL DIMENSION - 100mm (L) X 60mm (W) X 5mm (T) DIA – Ø 30.5mm NOTCH SIZE - 1mm X 1mm NOTCH WIDTH - 0.15mm STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 1084-30.5 MATERIAL: 2024-T3 ALUMINUM. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA517

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA517 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA36 / A36

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ASME SA36 / A36 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) TITANIUM

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) TITANIUM BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ALUMINUM

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) ALUMINUM BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) COPPER

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) COPPER BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: COPPER. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) INCONEL 625

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) INCONEL 625 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) INCONEL 825

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) INCONEL 825 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) MONAL 800

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) MONAL 800 BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) MAGNESIUM

BOEING 53-10-01 REFERENCE STANDARD (Metric Version) MAGNESIUM BOEING REFERENCE STANDARD 737 PT 6 53-10-01. Includes Test Report and Certificate of Conformance. DIMENSION: 50mm (L) x 25mm (W) x 6mm (T). BLOCK CONTAIN TWO HOLES Ø5mm (1)Hole with flaw – 2.5mm (L) x 0.1mm (W) x 0.5mm (Deep) (1)Hole without flaw MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.