CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA517
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA517 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: ASME SA517. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA36 / A36
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ASME SA36 / A36 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) TITANIUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) TITANIUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: TITANIUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ALUMINUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) ALUMINUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) COPPER
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) COPPER Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: COPPER. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) INCONEL 625
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) INCONEL 625 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) INCONEL 825
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) INCONEL 825 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) MONAL 800
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) MONAL 800 Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: MONAL 800. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) MAGNESIUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) MAGNESIUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) NICKEL
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version) NICKEL Custom McDonnell Douglas 12 bolt hole reference standard with 0.12mm max width X 0.76mm deep through EDM notch in holes #1-#6 and 1.5mm L x 0.76mm D x 0.12mm max width mid wall notch in holes #7-12, and 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole. Hole sizes (2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm) NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 85mm (L) x 38mm (W) x 6.35mm (T) Holes SIZE: Ø2.8, 3.2, 3.6, 4, 4.4, 4.8, 5.2, 5.6, 5.95, 6.35, 6.74, 7.14mm Hole Notch Configurations: • 0.76mm Through notch @ 0.12mm wide from hole 1 to 6 (Qty 6) • 1.5mm (L) x 0.76mm (D) x 0.12mm max width mid wall notch in holes 7 to 12 (Qty 6) • 0.76mm x 0.76mm x 0.12mm max width corner notch in each hole (Qty 12) MATERIAL: NICKEL. NOTE: For special alloy request by mail.