12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA516 Gr 70 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA517
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA517 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA517. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA36 / A36
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ASME SA36 / A36 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) STAINLESS STEEL 304 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) STAINLESS STEEL 316 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) TITANIUM
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) TITANIUM Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: TITANIUM. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ALUMINUM
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) ALUMINUM Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) COPPER
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) COPPER Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: COPPER. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) INCONEL 625
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) INCONEL 625 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) INCONEL 825
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) INCONEL 825 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) MONAL 800
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) MONAL 800 Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: MONAL 800. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) MAGNESIUM
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) MAGNESIUM Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) NICKEL
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version) NICKEL Contains 12 hole sizes; 4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm diameters. (0.76mmX0.76mm CORNER NOTCH and 3 SURFACE NOTCHES 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG.) DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4.8mm, 5.56mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 11.1mm, 12.7mm, 14.3mm, 15.9mm and 19mm Surface Notches: Qty 4 @ 0.25mm, 0.5mm and 1mm DEEP x 19mm LONG X 0.1mm wide Hole Notch Configurations: 0.76mmX0.76mm (45°) corner notch @ 0.1mm wide in each hole MATERIAL: NICKEL. NOTE: For special alloy request by mail.