SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.4”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.4" in 0.04", 0.08", 0.16", 0.24", 0.32" and 0.4" increments. 4.5" (L) x 0.75" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.5”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.5" in 0.03", 0.05", 0.10", 0.15", 0.30" and 0.5" increments. 4.5" (L) x 0.75" (W) x 0.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.1”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.050" – 0.10". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05" to 0.10" in 0.05", 0.06", 0.07", 0.08", 0.09" and 0.10" increments. 4.5" (L) x 0.75" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 0.15”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 0.15". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03" to 0.15" in 0.03", 0.04", 0.06", 0.08", 0.10" and 0.15" increments. 4.5" (L) x 0.75" (W) x 0.15" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.2”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.5" (L) x 0.75" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.08” – 0.5”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.080" – 0.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.08" to 0.50" in 0.08", 0.16", 0.24", 0.32", 0.40" and 0.50" increments. 4.7" (L) x 0.8" (W) x 0.50" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.6”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.020" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.60" in 0.02", 0.04", 0.08", 0.15", 0.30" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 0.6”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.10" – 0.6". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.10" to 0.60" in 0.10", 0.20", 0.30", 0.40", 0.50" and 0.60" increments. 4.7" (L) x 0.8" (W) x 0.60" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.015” – 0.1”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.015" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.015" to 0.10" in 0.015", 0.020", 0.040", 0.060", 0.070" and 0.10" increments. 4.7" (L) x 0.8" (W) x 0.10" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.04” – 0.11”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04" – 0.11". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.11" in 0.04", 0.050", 0.060", 0.075", 0.090" and 0.11" increments. 4.7" (L) x 0.8" (W) x 0.11" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.2” – 0.8”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.20" – 0.8". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.20" to 0.80" in 0.20", 0.30", 0.40", 0.50", 0.60" and 0.80" increments. 4.7" (L) x 0.80" (W) x 0.80" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: STANLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) STANLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: STANLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0 ". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.0”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.030" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.030" to 1.0" in 0.030", 0.10", 0.250", 0.50", 0.75" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.075” – 0.20”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.075" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.075" to 0.20" in 0.075", 0.10", 0.125", 0.15", 0.175" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA517 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) TITANIUM Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) ALUMINUM Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) COPPER Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) MONAL 800 Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.20”) WEDGE BLOCK (INCH VERSION) NICKEL Airbus A318/A319/A320/A321 51-10-04 Page 402 Figure 401, Measurement of Remaining Thickness in Large Blended out Areas-Procedure A. Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.20". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.20" in 0.02", 0.04", 0.08", 0.12", 0.16" and 0.20" increments. 4.7" (L) x 0.80" (W) x 0.20" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". STANDARD/MANUFACTURE REFERENCE/PART NUMBER: A320 51-10-04 MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.12", 0.20", 0.28" and 0.35" increments. 4.7" (L) x 0.80" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.03” – 1.5”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.03” – 1.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.03” to 1.5” in 0.03”, 0.04”, 0.06”, 0.08”, 0.1” and 1.5” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.75” – 0.2”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.75” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.75” to 0.2” in 0.75”, 0.1”, 0.125”, 0.15”, 0.175” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

FIVE STEP (0.05” – 0.4”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 5 Step Calibration Block for thickness and linearity calibration 5 Step Calibration Block 0.05” – 0.4”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 5 Step Calibration Block has steps starting at 0.05” to 0.4” in 0.05”, 0.1”, 0.2”, 0.3” and 0.4” increments. 5.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) ASME SA 516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA 516 Gr70. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) ASME SA 517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA 517. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.11”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.04” – 0.11”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.11” in 0.04”, 0.05”, 0.06”, 0.075”, 0.09” and 0.11” increments. 4.7” (L) x 0.787” (W) x 0.11” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.2” – 0.8”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.2” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.4” to 0.8” in 0.2”, 0.3”, 0.4”, 0.5”, 0.6” and 0.8” increments. 4.8” (L) x 0.787” (W) x 0.8” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX WEDGE (0.02” – 0.2”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.02” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.02” to 0.2” in 0.02”, 0.04”, 0.08”, 0.12”, 0.16” and 0.2” increments. 4.8” (L) x 0.787” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.787” x 0.787”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.040" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04" to 0.40" in 0.04", 0.08", 0.16", 0.25", 0.30" and 0.40" increments. 4.7" (L) x 0.8" (W) x 0.40" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.5” – 1.0”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.5” – 1.0”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.5” to 1.0” in 0.5”, 0.6”, 0.7”, 0.8”, 0.9” and 1.0” increments. 6.0” (L) x 1.0” (W) x 1.0” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP WEDGE (0.04” – 0.4”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.08” – 0.8”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.04” to 0.4” in 0.04”, 0.08”, 0.16”, 0.24”, 0.32” and 0.4” increments. 6.0” (L) x 1.0” (W) x 0.4” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.05” – 0.5”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.05” – 0.5”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.05” to 0.5” in 0.05”, 0.1”, 0.2”, 0.3”, 0.4” and 0.5” increments. 6.0” (L) x 1.0” (W) x 0.5” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0” x 1.0”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.1” – 1.0”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.1" – 1.0". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.1" to 1.0" in 0.1", 0.25", 0.40", 0.60", 0.8" and 1.0" increments. 6" (L) x 1.0" (W) x 1.0" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 1.0" x 1.0". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: COPPER. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

SIX STEP (0.025” – 1.5”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 6 Step Calibration Block for thickness and linearity calibration 6 Step Calibration Block 0.025" – 1.5". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 6 Step Calibration Block has steps starting at 0.025" to 0.15" in 0.025", 0.275", 0.525", 0.775", 1.325" and 1.5" increments. 6.0" (L) x 6.0" (W) x 1.5" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 6.0" (W) x 1.0" (L). MATERIAL: NICKEL. NOTE: For special alloy request by mail.