CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA516 Gr 70
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA516 Gr 70 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA517
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA517 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: ASME SA517. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA36 / A36
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ASME SA36 / A36 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 304
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 304 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 316
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 316 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) TITANIUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) TITANIUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: TITANIUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ALUMINUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) ALUMINUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) COPPER
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) COPPER Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: COPPER. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) INCONEL 625
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) INCONEL 625 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) INCONEL 825
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) INCONEL 825 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) MONAL 800
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) MONAL 800 Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: MONAL 800. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) MAGNESIUM
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) MAGNESIUM Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) NICKEL
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version) NICKEL Custom McDonnell Douglas 12 bolt hole reference standard with 0.005" max width X 0.03"deep through EDM notch in holes #1-#6 and 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes #7-12, and 0.030" x 0.030" x 0.005" max width corner notch in each hole. Hole sizes (0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", 0.281") NDT 06-20-01 FIG 4 Sheet 1 Page 8 Includes Test Report and Certificate of Conformance. DIMENSION: 3.4" (L) x 1.5" (W) x 0.25" (T) Holes SIZE: Ø0.109", 0.125", 0.1406", 0.1562", 0.1718", 0.1874", 0.203", 0.2186", 0.2342", 0.2498", 0.2654", and 0.281" Hole Notch Configurations: • 0.03" Through notch @ 0.005" wide from hole 1 to 6 (Qty 6) • 0.060"L x 0.030"D x 0.005" max width mid wall notch in holes 7 to 12 (Qty 6) • 0.030" x 0.030" x 0.005" max width corner notch in each hole (Qty 12) MATERIAL: NICKEL. NOTE: For special alloy request by mail.