12 HOLES REFERENCE STANDARD (Inch Version) ASME SA516 Gr 70 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: ASME SA516 Gr 70. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) ASME SA517 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) ASME SA36 / A36 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 304 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) STAINLESS STEEL 316 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) TITANIUM 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) ALUMINUM 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) COPPER 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: COPPER. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) INCONEL 625 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) INCONEL 825 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) MONAL 800 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) MAGNESIUM 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

12 HOLES REFERENCE STANDARD (Inch Version) NICKEL 12 HOLE REFERENCE STANDARD WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.12", 0.22", 0.25", 0.28", 0.31", 0.34", 0.38", 0.43", 0.5", 0.56", 0.63" and 0.75" Surface Notches: Qty 4 @ 0.01", 0.02", 0.04" and 0.05" deep x 1" long Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.02" full-bore (thru) notch @0.004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ 0.02" deep x 0.004" wide and (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ 0.03" deep x 0.004" wide x 0.06" long in each hole - (Qty 12). Notch Width (All): 0.004"mm (± .025) MATERIAL: NICKEL. NOTE: For special alloy request by mail.