EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.015” – 0.2”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015” – 0.2”. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015” to 0.2” in 0.015”, 0.025”, 0.04”, 0.06”, 0.08”, 0.1”, 0.15” and 0.2” increments. 6.0” (L) x 0.75” (W) x 0.2” (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75” x 0.75”. MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.08” – 0.625”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.08" – 0.625". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.08" to 0.625" in 0.08", 0.16", 0.24", 0.32", 0.4", 0.47", 0.55" and 0.625" increments. 6" (L) x 0.75" (W) x 0.625" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.03” – 0.1”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.03" – 0.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.03" to 0.1" in 0.03", 0.04", 0.05", 0.06", 0.07", 0.08", 0.09" and 0.1" increments. 6" (L) x 0.75" (W) x 0.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.28”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.28". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.3" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.24" and 0.28" increments. 6" (L) x 0.75" (W) x 0.28" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.55” – 1.1”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.55" – 1.1". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.55" to 1.1" in 0.55", 0.63", 0.71", 0.8", 0.86", 0.95", 1.02" and 1.1" increments. 6" (L) x 0.75" (W) x 1.1" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.11” – 0.18”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.11" – 0.18". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.11" to 0.18" in 0.11", 0.12", 0.13", 0.14", 0.15", 0.16", 0.17" and 0.18" increments. 6" (L) x 0.75" (W) x 0.18" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.04” – 0.32”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.04" – 0.32". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.04" to 0.32" in 0.04", 0.08", 0.12", 0.16", 0.2", 0.24", 0.28" and 0.32" increments. 6" (L) x 0.75" (W) x 0.32" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.35”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.35". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.35" in 0.02", 0.04", 0.08", 0.12", 0.16", 0.2", 0.28" and 0.35" increments. 6" (L) x 0.75" (W) x 0.35" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP (0.02” – 0.4”) WEDGE BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.02" – 0.4". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.02" to 0.4" in 0.02", 0.04", 0.06", 0.08", 0.1", 0.2", 0.3" and 0.4" increments. 6.3" (L) x 0.8" (W) x 0.4" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.8" x 0.8". MATERIAL: NICKEL. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) ASME SA516 Gr70 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA516 Gr70. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) ASME SA517 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA517. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) ASME SA36 / A36 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ASME SA36 / A36. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) STAINLESS STEEL 304 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 304. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) STAINLESS STEEL 316 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: STAINLESS STEEL 316. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) TITANIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: TITANIUM. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) ALUMINUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: ALUMINUM. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) COPPER Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: COPPER. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) INCONEL 625 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 625. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) INCONEL 825 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: INCONEL 825. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) MONAL 800 Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MONAL 800. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) MAGNESIUM Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: MAGNESIUM. NOTE: For special alloy request by mail.

EIGHT STEP WEDGE (0.015” – 0.2”) BLOCK (INCH VERSION) NICKEL Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 8 Step Calibration Block for thickness and linearity calibration 8 Step Calibration Block 0.015" – 0.2". Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 8 Step Calibration Block has steps starting at 0.015" to 0.2" in 0.015", 0.025", 0.04", 0.06", 0.08", 0.1", 0.15" and 0.2" increments. 6" (L) x 0.75" (W) x 0.2" (T). NOTE: Customized Step Block also available. METRIC STEP FACE: 0.75" x 0.75". MATERIAL: NICKEL. NOTE: For special alloy request by mail.