Custom 2 Bolt Hole Calibration Block

Custom 2 Bolt Hole Calibration Block (Inch Version)

Custom 2 Bolt Hole Calibration Block (Inch Version) Custom Bolt Hole Calibration Block. Hole Diameter = 2 Holes Ø 0.445" each. Hole 1 = No EDM Flaws, Hole 2 = 0.030" x 0.030" x 0.004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Conformance. DIMENSION - 3.0" (L) x 1.5" (W) x 0.25" (T). BLOCK CONTAINS TWO HOLES DIA – Ø 0.445" (1)HOLE WITH CORNER NOTCH - 0.030" x 0.030", NOTCH WIDTH - 0.004" (1)HOLE WITHOUT FLAW. NOTE: For special alloy request by mail.

Custom 2 Bolt Hole Calibration Block (Metric Version)

Custom 2 Bolt Hole Calibration Block (Metric Version) Custom Bolt Hole Calibration Block. Hole Diameter = 2 Holes Ø 11mm each. Hole 1 = No EDM Flaws, Hole 2 = 0.76mm x 0.76mm x 0.1mm +/- 0.02mm EDM Notch. Block Size = 75mm x 38mm x 6.35mm. Includes Test Report and Certificate of Conformance. DIMENSION - 75mm (L) x 38mm (W) x 6.35mm (T). BLOCK CONTAINS TWO HOLES DIA – Ø 11mm (1)HOLE WITH CORNER NOTCH - 0.76mm x 0.76mm, NOTCH WIDTH - 0.1mm (1)HOLE WITHOUT FLAW. NOTE: For special alloy request by mail.

12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
4 HOLES REFERENCE STANDARD
- 4 HOLES REFERENCE STANDARD (Inch Version)
- 4 HOLES REFERENCE STANDARD (Metric Version)
Custom 2 Bolt Hole Calibration Block
- Custom 2 Bolt Hole Calibration Block (Inch Version)
- Custom 2 Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole Calibration Block
- Custom TWO Bolt Hole Calibration Block (Inch Version)
- Custom TWO Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole With ONE Flaw Calibration Block
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Inch Version)
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Metric Version)
Custom 2 Bolt Hole with 1 Flaw Reference Block
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Inch Version)
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Metric Version)
Custom Bolt Hole Block
- Custom Bolt Hole Block (Inch Version)
- Custom Bolt Hole Block (Metric Version)
Custom 2 Bolt Hole Block
- Custom 2 Bolt Hole Block (Inch Version)
- Custom 2 Bolt Hole Block (Metric Version)
3 HOLE REFERENCE STANDARD BLOCK
- 3 HOLE REFERENCE STANDARD BLOCK (Inch Version)
- 3 HOLE REFERENCE STANDARD BLOCK (Metric Version)
5 HOLE REFERENCE STANDARD
- 5 HOLE REFERENCE STANDARD (Inch Version)
- 5 HOLE REFERENCE STANDARD (Metric Version)
12 HOLES REFERENCE STANDARD
- 12 HOLES REFERENCE STANDARD (Inch Version)
- 12 HOLES REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES REFERENCE STANDARD
- 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
Custom 4 Holes Calibration Standard
- Custom 4 Holes Calibration Standard (Inch Version)
- Custom 4 Holes Calibration Standard (Metric Version)
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Metric Version)
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
Custom Bolt Hole Calibration Block
- Custom Bolt Hole Calibration Block (Inch Version)
- Custom Bolt Hole Reference Block (Metric Version)
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
- Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block (Inch Version)
- Custom 2 (16.0mm) Bolt Hole With 1 Flaw Reference Block (Metric Version)
TEN STEP WEDGE BLOCK
- TEN STEP WEDGE BLOCK (INCH VERSION)
- TEN STEP WEDGE BLOCK (METRIC VERSION)
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Metric Version)
CUSTOM SURFACE CALIBRATION BLOCK
- CUSTOM SURFACE CALIBRATION BLOCK (Inch Version)
- CUSTOM SURFACE CALIBRATION BLOCK (Metric Version)
EDDY CURRENT SURFACE STANDARD BLOCK
- EDDY CURRENT SURFACE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE STANDARD BLOCK (Metric Version)
EDDY CURRENT 4 NOTCH BLOCK
- EDDY CURRENT 4 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 4 NOTCH BLOCK (Metric Version)
EDDY CURRENT 3 NOTCH BLOCK
- EDDY CURRENT 3 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 3 NOTCH BLOCK (Metric Version)
EDDY CURRENT 5 NOTCH BLOCK
- EDDY CURRENT 5 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 5 NOTCH BLOCK (Metric Version)
FOUR STEP WEDGE BLOCK
- FOUR STEP WEDGE BLOCK (INCH VERSION)
- FOUR STEP WEDGE BLOCK (METRIC VERSION)
FIVE STEP WEDGE BLOCK
- FIVE STEP WEDGE BLOCK (INCH VERSION)
- FIVE STEP WEDGE BLOCK (METRIC VERSION)
SURFACE EDM REFERENCE STANDARD BLOCK
- SURFACE EDM REFERENCE STANDARD BLOCK (Inch Version)
- SURFACE EDM REFERENCE STANDARD BLOCK (Metric Version)
AIRBUS TAP TEST TOOL
- AIRBUS TAP TEST TOOL-99D57204183000 (Inch Version)
- AIRBUS TAP TEST TOOL-99D57204183000 (Metric Version)
TWO STEP WEDGE BLOCK
- TWO STEP WEDGE BLOCK (INCH VERSION)
- TWO STEP WEDGE BLOCK (METRIC VERSION)
SIX STEP WEDGE BLOCK
- SIX STEP WEDGE BLOCK (INCH VERSION)
- SIX STEP WEDGE BLOCK (METRIC VERSION)
3 STEP WEDGE BLOCK
- 3 STEP WEDGE BLOCK (INCH VERSION)
- 3 STEP THIN WEDGE BLOCK (METRIC VERSION)
SEVEN STEP WEDGE BLOCK
- SEVEN STEP WEDGE BLOCK (INCH VERSION)
- SEVEN STEP WEDGE BLOCK (METRIC VERSION)
SURFACE STANDARD BLOCK
- SURFACE STANDARD BLOCK (Inch Version)
- SURFACE STANDARD BLOCK (Metric Version)
EIGHT STEP WEDGE BLOCK
- EIGHT STEP WEDGE BLOCK (INCH VERSION)
- EIGHT STEP WEDGE BLOCK (METRIC VERSION)
AIRBUS CALIBRATION BLOCK
- AIRBUS CALIBRATION BLOCK-2-835-01-9301(Inch Version)
- AIRBUS CALIBRATION BLOCK-2-835-01-9301 (Metric Version)
AIRBUS MULTIDIRECTIONAL BLOCK SET
- AIRBUS MULTIDIRECTIONAL BLOCK SET INCH VERSION
- AIRBUS MULTIDIRECTIONAL BLOCK SET METRIC VERSION
AIRBUS REFERENCE STANDARD
- AIRBUS REFERENCE STANDARD INCH VERSION
- AIRBUS REFERENCE STANDARD METRIC VERSION
ATR REFERENCE STANDARD
- ATR REFERENCE STANDARD (Inch Version)
- ATR REFERENCE STANDARD (Metric Version)
CORROSION TEST PLATE
- CORROSION TEST PLATE (Inch Version)
- CORROSION TEST PLATE (Metric Version)
AIRBUS CALIBRATION BLOCK SET
- AIRBUS CALIBRATION BLOCK SET (Inch Version)
- AIRBUS CALIBRATION BLOCK SET (Metric Version)
AIRBUS MULTI HOLE REFERENCE STANDARD
- AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version)
- AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version)
SPLITTED CONICAL CALIBRATION STANDARD
- SPLITTED CONICAL CALIBRATION STANDARD (Inch Version)
- SPLITTED CONICAL CALIBRATION STANDARD (Metric Version)
BOEING REFERENCE STANDARD
- BOEING REFERENCE STANDARD (Inch Version)
- BOEING REFERENCE STANDARD (Metric Version)
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Inch Version)
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Metric Version)
WHEEL REFERENCE STANDARD
- WHEEL REFERENCE STANDARD (Inch Version)
- WHEEL REFERENCE STANDARD (Metric Version)
EDM REFERENCE STANDARD
- EDM REFERENCE STANDARD (Inch Version)
- EDM REFERENCE STANDARD (Metric Version)
3 HOLE REFERENCE STANDARD
- 3 HOLE REFERENCE STANDARD (Inch Version)
- 3 HOLE REFERENCE STANDARD (Metric Version)