![](https://ndeflawtechnologies.com/admin/images/category/1667032742_3 STEP WEDGE BLOCK.jpg)
3 STEP WEDGE BLOCK (INCH VERSION)
3 STEP WEDGE BLOCK (INCH VERSION) Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 3 Step Calibration Block for thickness and linearity calibration 3 Step Calibration Block 0.015” – 0.07” with two EDM flaws. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 3 Step Calibration Block has steps starting at 0.015” to 0.07” in 0.015”, 0.03” and 0.07” increments. 4.5” (L) x 1.0” (W) x 0.07” (T). NOTCH SIZE : 1. 0.3”(L) x 0.005” (W) x 0.01” (Deep) 2. 0.3” (L) x 0.005” (W) x 0.02” (Deep) NOTE: Customized Step Block also available. METRIC STEP FACE: 1.5” x 1.0”.
![](https://ndeflawtechnologies.com/admin/images/category/1667032808_3 STEP WEDGE BLOCK NDT CALIBRATION.jpg)
3 STEP THIN WEDGE BLOCK (METRIC VERSION)
3 STEP THIN WEDGE BLOCK (METRIC VERSION) Step calibration wedges come in a large variety of sizes and configurations. Step wedges are typically manufactured with four or five or steps but custom wedge can be obtained with any number of steps. 3 Step Calibration Block for thickness and linearity calibration 3 Step Calibration Block 0.4mm – 2.0mm with two EDM flaws. Includes Test Report Traceable to NIST and Certificate of Conformance. DIMENSIONS: 3 Step Calibration Block has steps starting at 0.4mm to 2.0mm in 0.4mm, 0.75mm and 2.0mm increments. 120mm (L) x 25mm (W) x 2.0mm (T). NOTCH SIZE : 1. 7.6mm (L) x 0.12mm (W) x 0.25mm (Deep) 2. 7.6mm (L) x 0.12mm (W) x 0.5mm (Deep) NOTE: Customized Step Block also available. METRIC STEP FACE: 40mm x 25mm.
-
12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
-
4 HOLES REFERENCE STANDARD
-
Custom 2 Bolt Hole Calibration Block
-
Custom TWO Bolt Hole Calibration Block
-
Custom TWO Bolt Hole With ONE Flaw Calibration Block
-
Custom 2 Bolt Hole with 1 Flaw Reference Block
-
Custom Bolt Hole Block
-
Custom 2 Bolt Hole Block
-
3 HOLE REFERENCE STANDARD BLOCK
-
5 HOLE REFERENCE STANDARD
-
12 HOLES REFERENCE STANDARD
-
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
-
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
-
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
-
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
-
12 BOLT HOLES REFERENCE STANDARD
-
Custom 4 Holes Calibration Standard
-
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
-
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
-
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
-
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
-
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
-
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
-
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
-
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
-
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
-
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
-
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
-
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
-
Custom Bolt Hole Calibration Block
-
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
-
TEN STEP WEDGE BLOCK
-
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
-
CUSTOM SURFACE CALIBRATION BLOCK
-
EDDY CURRENT SURFACE STANDARD BLOCK
-
EDDY CURRENT 4 NOTCH BLOCK
-
EDDY CURRENT 3 NOTCH BLOCK
-
EDDY CURRENT 5 NOTCH BLOCK
-
FOUR STEP WEDGE BLOCK
-
FIVE STEP WEDGE BLOCK
-
SURFACE EDM REFERENCE STANDARD BLOCK
-
AIRBUS TAP TEST TOOL
-
TWO STEP WEDGE BLOCK
-
SIX STEP WEDGE BLOCK
-
3 STEP WEDGE BLOCK
-
SEVEN STEP WEDGE BLOCK
-
SURFACE STANDARD BLOCK
-
EIGHT STEP WEDGE BLOCK
-
AIRBUS CALIBRATION BLOCK
-
AIRBUS MULTIDIRECTIONAL BLOCK SET
-
AIRBUS REFERENCE STANDARD
-
ATR REFERENCE STANDARD
-
CORROSION TEST PLATE
-
AIRBUS CALIBRATION BLOCK SET
-
AIRBUS MULTI HOLE REFERENCE STANDARD
-
SPLITTED CONICAL CALIBRATION STANDARD
-
BOEING REFERENCE STANDARD
-
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
-
WHEEL REFERENCE STANDARD
-
EDM REFERENCE STANDARD
-
3 HOLE REFERENCE STANDARD