3 HOLE REFERENCE STANDARD BLOCK

3 HOLE REFERENCE STANDARD BLOCK (Inch Version)

3 HOLE REFERENCE STANDARD BLOCK (Inch Version) 3 HOLE REFERENCE STANDARD. HOLE SIZES: 1/4", 5/16", 3/8" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". 3 EDM SURFACE NOTCHES 0.008", 0.020", 0.040". Includes Test Report and Certificate of Conformance. DIMENSION - 3" (L) X 1.2" (W) X 0.2" (T) EACH HOLES CONTAINS CORNER NOTCH AND (3) EDM SURFACE NOTCH HOLE SIZE - Ø1/4", 5/16", 3/8" CORNER NOTCH - 0.030" x 0.030", CORNER NOTCH WIDTH – 0.004" SURFACE NOTCH DEPTH - 0.008", 0.020", 0.040", SURFACE NOTCH WIDTH - 0.004" NOTE: For special alloy request by mail.

3 HOLE REFERENCE STANDARD BLOCK (Metric Version)

3 HOLE REFERENCE STANDARD BLOCK (Metric Version) 3 HOLE REFERENCE STANDARD. HOLE SIZES: 6.35mm, 8mm, 9.5mm TOTAL OF 3 EDM CORNER NOTCHES 0.76mm x 0.76mm. 3 EDM SURFACE NOTCHES 0.2mm, 0.5mm, 1mm. Includes Test Report and Certificate of Conformance. DIMENSION - 75mm (L) X 30mm (W) X 6.35mm (T) EACH HOLES CONTAINS CORNER NOTCH AND (3) EDM SURFACE NOTCH HOLE SIZE - Ø6.35mm, 8mm, 9.5mm CORNER NOTCH - 0.76mm x 0.76mm, CORNER NOTCH WIDTH – 0.1mm SURFACE NOTCH DEPTH - 0.2mm, 0.5mm, 1mm, SURFACE NOTCH WIDTH - 0.1mm

12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
4 HOLES REFERENCE STANDARD
- 4 HOLES REFERENCE STANDARD (Inch Version)
- 4 HOLES REFERENCE STANDARD (Metric Version)
Custom 2 Bolt Hole Calibration Block
- Custom 2 Bolt Hole Calibration Block (Inch Version)
- Custom 2 Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole Calibration Block
- Custom TWO Bolt Hole Calibration Block (Inch Version)
- Custom TWO Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole With ONE Flaw Calibration Block
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Inch Version)
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Metric Version)
Custom 2 Bolt Hole with 1 Flaw Reference Block
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Inch Version)
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Metric Version)
Custom Bolt Hole Block
- Custom Bolt Hole Block (Inch Version)
- Custom Bolt Hole Block (Metric Version)
Custom 2 Bolt Hole Block
- Custom 2 Bolt Hole Block (Inch Version)
- Custom 2 Bolt Hole Block (Metric Version)
3 HOLE REFERENCE STANDARD BLOCK
- 3 HOLE REFERENCE STANDARD BLOCK (Inch Version)
- 3 HOLE REFERENCE STANDARD BLOCK (Metric Version)
5 HOLE REFERENCE STANDARD
- 5 HOLE REFERENCE STANDARD (Inch Version)
- 5 HOLE REFERENCE STANDARD (Metric Version)
12 HOLES REFERENCE STANDARD
- 12 HOLES REFERENCE STANDARD (Inch Version)
- 12 HOLES REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES REFERENCE STANDARD
- 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
Custom 4 Holes Calibration Standard
- Custom 4 Holes Calibration Standard (Inch Version)
- Custom 4 Holes Calibration Standard (Metric Version)
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Metric Version)
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
Custom Bolt Hole Calibration Block
- Custom Bolt Hole Calibration Block (Inch Version)
- Custom Bolt Hole Reference Block (Metric Version)
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
- Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block (Inch Version)
- Custom 2 (16.0mm) Bolt Hole With 1 Flaw Reference Block (Metric Version)
TEN STEP WEDGE BLOCK
- TEN STEP WEDGE BLOCK (INCH VERSION)
- TEN STEP WEDGE BLOCK (METRIC VERSION)
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Metric Version)
CUSTOM SURFACE CALIBRATION BLOCK
- CUSTOM SURFACE CALIBRATION BLOCK (Inch Version)
- CUSTOM SURFACE CALIBRATION BLOCK (Metric Version)
EDDY CURRENT SURFACE STANDARD BLOCK
- EDDY CURRENT SURFACE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE STANDARD BLOCK (Metric Version)
EDDY CURRENT 4 NOTCH BLOCK
- EDDY CURRENT 4 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 4 NOTCH BLOCK (Metric Version)
EDDY CURRENT 3 NOTCH BLOCK
- EDDY CURRENT 3 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 3 NOTCH BLOCK (Metric Version)
EDDY CURRENT 5 NOTCH BLOCK
- EDDY CURRENT 5 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 5 NOTCH BLOCK (Metric Version)
FOUR STEP WEDGE BLOCK
- FOUR STEP WEDGE BLOCK (INCH VERSION)
- FOUR STEP WEDGE BLOCK (METRIC VERSION)
FIVE STEP WEDGE BLOCK
- FIVE STEP WEDGE BLOCK (INCH VERSION)
- FIVE STEP WEDGE BLOCK (METRIC VERSION)
SURFACE EDM REFERENCE STANDARD BLOCK
- SURFACE EDM REFERENCE STANDARD BLOCK (Inch Version)
- SURFACE EDM REFERENCE STANDARD BLOCK (Metric Version)
AIRBUS TAP TEST TOOL
- AIRBUS TAP TEST TOOL-99D57204183000 (Inch Version)
- AIRBUS TAP TEST TOOL-99D57204183000 (Metric Version)
TWO STEP WEDGE BLOCK
- TWO STEP WEDGE BLOCK (INCH VERSION)
- TWO STEP WEDGE BLOCK (METRIC VERSION)
SIX STEP WEDGE BLOCK
- SIX STEP WEDGE BLOCK (INCH VERSION)
- SIX STEP WEDGE BLOCK (METRIC VERSION)
3 STEP WEDGE BLOCK
- 3 STEP WEDGE BLOCK (INCH VERSION)
- 3 STEP THIN WEDGE BLOCK (METRIC VERSION)
SEVEN STEP WEDGE BLOCK
- SEVEN STEP WEDGE BLOCK (INCH VERSION)
- SEVEN STEP WEDGE BLOCK (METRIC VERSION)
SURFACE STANDARD BLOCK
- SURFACE STANDARD BLOCK (Inch Version)
- SURFACE STANDARD BLOCK (Metric Version)
EIGHT STEP WEDGE BLOCK
- EIGHT STEP WEDGE BLOCK (INCH VERSION)
- EIGHT STEP WEDGE BLOCK (METRIC VERSION)
AIRBUS CALIBRATION BLOCK
- AIRBUS CALIBRATION BLOCK-2-835-01-9301(Inch Version)
- AIRBUS CALIBRATION BLOCK-2-835-01-9301 (Metric Version)
AIRBUS MULTIDIRECTIONAL BLOCK SET
- AIRBUS MULTIDIRECTIONAL BLOCK SET INCH VERSION
- AIRBUS MULTIDIRECTIONAL BLOCK SET METRIC VERSION
AIRBUS REFERENCE STANDARD
- AIRBUS REFERENCE STANDARD INCH VERSION
- AIRBUS REFERENCE STANDARD METRIC VERSION
ATR REFERENCE STANDARD
- ATR REFERENCE STANDARD (Inch Version)
- ATR REFERENCE STANDARD (Metric Version)
CORROSION TEST PLATE
- CORROSION TEST PLATE (Inch Version)
- CORROSION TEST PLATE (Metric Version)
AIRBUS CALIBRATION BLOCK SET
- AIRBUS CALIBRATION BLOCK SET (Inch Version)
- AIRBUS CALIBRATION BLOCK SET (Metric Version)
AIRBUS MULTI HOLE REFERENCE STANDARD
- AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version)
- AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version)
SPLITTED CONICAL CALIBRATION STANDARD
- SPLITTED CONICAL CALIBRATION STANDARD (Inch Version)
- SPLITTED CONICAL CALIBRATION STANDARD (Metric Version)
BOEING REFERENCE STANDARD
- BOEING REFERENCE STANDARD (Inch Version)
- BOEING REFERENCE STANDARD (Metric Version)
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Inch Version)
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Metric Version)
WHEEL REFERENCE STANDARD
- WHEEL REFERENCE STANDARD (Inch Version)
- WHEEL REFERENCE STANDARD (Metric Version)
EDM REFERENCE STANDARD
- EDM REFERENCE STANDARD (Inch Version)
- EDM REFERENCE STANDARD (Metric Version)
3 HOLE REFERENCE STANDARD
- 3 HOLE REFERENCE STANDARD (Inch Version)
- 3 HOLE REFERENCE STANDARD (Metric Version)