12 HOLES WITH CORNER NOTCH REFERENCE STANDARD

12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)

12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version) 12 HOLE REFERENCE STANDARD 0.156", 0.187", 0.199", 0.218", 0.250", 0.281", 0.312", 0.343", 0.375", 0.406", 0.437", 0.500", 0.030" X 0.030" CORNER NOTCH, 0.050" X 0.050" CORNER NOTCH ( 24 EDM NOTCHES TOTAL). DIMENSION: 6" (L) x 2.5" (W) x 0.25" (T) Holes SIZE: Ø0.156", 0.187", 0.199", 0.218", 0.250", 0.281", 0.312", 0.343", 0.375", 0.406", 0.437", 0.500" Hole Notch Configurations: (1)0.03" x 0.03" (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 0.05" x 0.05" (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 12) NOTE: For special alloy request by mail.

12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)

12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version) 12 HOLE REFERENCE STANDARD 4mm, 4.8mm, 5.1mm, 5.54mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 10.3mm, 11.1mm and 12.7mm, 0.76mm x 0.76mm CORNER NOTCH, 1.27mm X 1.27mm CORNER NOTCH ( 24 EDM NOTCHES TOTAL). DIMENSION: 152mm (L) x 63mm (W) x 6.35mm (T) Holes SIZE: Ø4mm, 4.8mm, 5.1mm, 5.54mm, 6.35mm, 7.14mm, 7.93mm, 8.7mm, 9.53mm, 10.3mm, 11.1mm and 12.7mm Hole Notch Configurations: (1)0.76mm x 0.76mm (45°) corner notch @ 0.004" wide in each hole (Qty 12) (1) 1.27mm x 1.27mm (45°) corner notch @ 0.004" wide in each hole, 180° apart (Qty 12) NOTE: For special alloy request by mail.

12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
4 HOLES REFERENCE STANDARD
- 4 HOLES REFERENCE STANDARD (Inch Version)
- 4 HOLES REFERENCE STANDARD (Metric Version)
Custom 2 Bolt Hole Calibration Block
- Custom 2 Bolt Hole Calibration Block (Inch Version)
- Custom 2 Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole Calibration Block
- Custom TWO Bolt Hole Calibration Block (Inch Version)
- Custom TWO Bolt Hole Calibration Block (Metric Version)
Custom TWO Bolt Hole With ONE Flaw Calibration Block
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Inch Version)
- Custom TWO Bolt Hole With ONE Flaw Calibration Block (Metric Version)
Custom 2 Bolt Hole with 1 Flaw Reference Block
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Inch Version)
- Custom 2 Bolt Hole with 1 Flaw Reference Block (Metric Version)
Custom Bolt Hole Block
- Custom Bolt Hole Block (Inch Version)
- Custom Bolt Hole Block (Metric Version)
Custom 2 Bolt Hole Block
- Custom 2 Bolt Hole Block (Inch Version)
- Custom 2 Bolt Hole Block (Metric Version)
3 HOLE REFERENCE STANDARD BLOCK
- 3 HOLE REFERENCE STANDARD BLOCK (Inch Version)
- 3 HOLE REFERENCE STANDARD BLOCK (Metric Version)
5 HOLE REFERENCE STANDARD
- 5 HOLE REFERENCE STANDARD (Inch Version)
- 5 HOLE REFERENCE STANDARD (Metric Version)
12 HOLES REFERENCE STANDARD
- 12 HOLES REFERENCE STANDARD (Inch Version)
- 12 HOLES REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 12 HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND SURFACE NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES REFERENCE STANDARD
- 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
Custom 4 Holes Calibration Standard
- Custom 4 Holes Calibration Standard (Inch Version)
- Custom 4 Holes Calibration Standard (Metric Version)
12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH CORNER AND SURFACE NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER NOTCH REFERENCE STANDARD (Metric Version)
12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 12 BOLT HOLES WITH 2 CORNER AND 4 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES REFERENCE STANDARD (Metric Version)
CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Inch Version)
- CUSTOM McDONNELL DOUGLAS 12 BOLT HOLES WITH CORNER AND MID WALL NOTCH REFERENCE STANDARD (Metric Version)
10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 10 HOLES WITH 1 CORNER AND 3 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Inch Version)
- 14 BOLT HOLES 2 CORNER AND 1 SURFACE NOTCH REFERENCE STANDARD (Metric Version)
11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Inch Version)
- 11 BOLT HOLES WITH 2 CORNER NOTCH CALIBRATION REFERENCE STANDARD (Metric Version)
7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 7 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 11 HOLES WITH 11 CORNER NOTCH REFERENCE STANDARD (Metric Version)
14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Inch Version)
- 14 HOLES WITH 14 CORNER NOTCH REFERENCE STANDARD (Metric Version)
Custom Bolt Hole Calibration Block
- Custom Bolt Hole Calibration Block (Inch Version)
- Custom Bolt Hole Reference Block (Metric Version)
Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block
- Custom 2 (0.63") Bolt Hole With 1 Flaw Reference Block (Inch Version)
- Custom 2 (16.0mm) Bolt Hole With 1 Flaw Reference Block (Metric Version)
TEN STEP WEDGE BLOCK
- TEN STEP WEDGE BLOCK (INCH VERSION)
- TEN STEP WEDGE BLOCK (METRIC VERSION)
EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE REFERENCE STANDARD BLOCK (Metric Version)
CUSTOM SURFACE CALIBRATION BLOCK
- CUSTOM SURFACE CALIBRATION BLOCK (Inch Version)
- CUSTOM SURFACE CALIBRATION BLOCK (Metric Version)
EDDY CURRENT SURFACE STANDARD BLOCK
- EDDY CURRENT SURFACE STANDARD BLOCK (Inch Version)
- EDDY CURRENT SURFACE STANDARD BLOCK (Metric Version)
EDDY CURRENT 4 NOTCH BLOCK
- EDDY CURRENT 4 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 4 NOTCH BLOCK (Metric Version)
EDDY CURRENT 3 NOTCH BLOCK
- EDDY CURRENT 3 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 3 NOTCH BLOCK (Metric Version)
EDDY CURRENT 5 NOTCH BLOCK
- EDDY CURRENT 5 NOTCH BLOCK (Inch Version)
- EDDY CURRENT 5 NOTCH BLOCK (Metric Version)
FOUR STEP WEDGE BLOCK
- FOUR STEP WEDGE BLOCK (INCH VERSION)
- FOUR STEP WEDGE BLOCK (METRIC VERSION)
FIVE STEP WEDGE BLOCK
- FIVE STEP WEDGE BLOCK (INCH VERSION)
- FIVE STEP WEDGE BLOCK (METRIC VERSION)
SURFACE EDM REFERENCE STANDARD BLOCK
- SURFACE EDM REFERENCE STANDARD BLOCK (Inch Version)
- SURFACE EDM REFERENCE STANDARD BLOCK (Metric Version)
AIRBUS TAP TEST TOOL
- AIRBUS TAP TEST TOOL-99D57204183000 (Inch Version)
- AIRBUS TAP TEST TOOL-99D57204183000 (Metric Version)
TWO STEP WEDGE BLOCK
- TWO STEP WEDGE BLOCK (INCH VERSION)
- TWO STEP WEDGE BLOCK (METRIC VERSION)
SIX STEP WEDGE BLOCK
- SIX STEP WEDGE BLOCK (INCH VERSION)
- SIX STEP WEDGE BLOCK (METRIC VERSION)
3 STEP WEDGE BLOCK
- 3 STEP WEDGE BLOCK (INCH VERSION)
- 3 STEP THIN WEDGE BLOCK (METRIC VERSION)
SEVEN STEP WEDGE BLOCK
- SEVEN STEP WEDGE BLOCK (INCH VERSION)
- SEVEN STEP WEDGE BLOCK (METRIC VERSION)
SURFACE STANDARD BLOCK
- SURFACE STANDARD BLOCK (Inch Version)
- SURFACE STANDARD BLOCK (Metric Version)
EIGHT STEP WEDGE BLOCK
- EIGHT STEP WEDGE BLOCK (INCH VERSION)
- EIGHT STEP WEDGE BLOCK (METRIC VERSION)
AIRBUS CALIBRATION BLOCK
- AIRBUS CALIBRATION BLOCK-2-835-01-9301(Inch Version)
- AIRBUS CALIBRATION BLOCK-2-835-01-9301 (Metric Version)
AIRBUS MULTIDIRECTIONAL BLOCK SET
- AIRBUS MULTIDIRECTIONAL BLOCK SET INCH VERSION
- AIRBUS MULTIDIRECTIONAL BLOCK SET METRIC VERSION
AIRBUS REFERENCE STANDARD
- AIRBUS REFERENCE STANDARD INCH VERSION
- AIRBUS REFERENCE STANDARD METRIC VERSION
ATR REFERENCE STANDARD
- ATR REFERENCE STANDARD (Inch Version)
- ATR REFERENCE STANDARD (Metric Version)
CORROSION TEST PLATE
- CORROSION TEST PLATE (Inch Version)
- CORROSION TEST PLATE (Metric Version)
AIRBUS CALIBRATION BLOCK SET
- AIRBUS CALIBRATION BLOCK SET (Inch Version)
- AIRBUS CALIBRATION BLOCK SET (Metric Version)
AIRBUS MULTI HOLE REFERENCE STANDARD
- AIRBUS MULTI HOLE REFERENCE STANDARD (Inch Version)
- AIRBUS MULTI HOLE REFERENCE STANDARD (Metric Version)
SPLITTED CONICAL CALIBRATION STANDARD
- SPLITTED CONICAL CALIBRATION STANDARD (Inch Version)
- SPLITTED CONICAL CALIBRATION STANDARD (Metric Version)
BOEING REFERENCE STANDARD
- BOEING REFERENCE STANDARD (Inch Version)
- BOEING REFERENCE STANDARD (Metric Version)
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Inch Version)
- AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD (Metric Version)
WHEEL REFERENCE STANDARD
- WHEEL REFERENCE STANDARD (Inch Version)
- WHEEL REFERENCE STANDARD (Metric Version)
EDM REFERENCE STANDARD
- EDM REFERENCE STANDARD (Inch Version)
- EDM REFERENCE STANDARD (Metric Version)
3 HOLE REFERENCE STANDARD
- 3 HOLE REFERENCE STANDARD (Inch Version)
- 3 HOLE REFERENCE STANDARD (Metric Version)