Titanium A4 ET Block with Shims ET Block with Shims Qty: 1 Specifications: • Titanium A4 ET Block • Alternate Alloy options AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.

Stainless 316 ET Block with Shims ET Block with Shims Qty: 1 Specifications: • Stainless 316 ET Block • Alternate Alloy options AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.

Stainless 304 ET Block with Shims ET Block with Shims Qty: 1 Specifications: • Stainless 304 ET Block • Alternate Alloy options AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.

Carbon Steel 1018 ET Block with Shims ET Block with Shims Qty: 1 Specifications: • Carbon Steel 1018 Block • Alternate Alloy options AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.

Aluminum 6061 ET Block with Shims ET Block with Shims Qty: 1 Specifications: • Aluminum 6061 Block • Alternate Alloy options AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.

ET Block with Shims | Set of 5 ET Block with Shims Qty: 1 Specifications: • Block alloy is AS NEEDED (see alloy options below) • Block has four (4) notches that are 0.012” wide and at depths of 0.010”, 0.020”, 0.040” and 0.060”. These dimensions are stamped on the block. Actual dimensions may vary +/-0.002”. • The block nominal dimensions are 0.25” T x 1” wide x 6” long • The block has a total of eight (8) shims attached to it by a stainless chain. • There are four (4) aluminum shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • There are four (4) plastic shims • (2) at 0.005” T • (1) at 0.015” T • (1) at 0.025” T • The shims are color coded, 0.005” Blue, 0.015” Pink and 0.025” White. This information is stamped on the bottom of the block. • The shim thickness range combination allows for 0.005” to 0.050” per material at 0.005” T intervals. • Additional shims can be added for more thickness. Documentation: • Includes C of C, “As Built” CAD Drawing and MTR for block material.