VT CORROSION/EROSION Sixteen Section Plate 6mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 6mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 10mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 10mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 12.5mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 12.5mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 15mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 15mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 19mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 19mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 25mm 1018 Carbon Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 1018 carbon steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 25mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 6mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 6mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 10mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 10mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 12.5mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 12.5mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 15mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 15mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 19mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 19mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates

VT CORROSION/EROSION Sixteen Section Plate 25mm 304 Stainless Steel Corrosion, Erosion, and Lamination VT Thickness Training & Certification Plates Material: • 304 Stainless Steel Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • Dimension 400mm (W) x 400mm (L) x 25mm (T). • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates