V3 Test Calibration Block (Inch Version) Special Alloy For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: Special Alloy

V3 Test Calibration Block (Inch Version) 1018 Steel For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: 1018 Steel

V3 Test Calibration Block (Inch Version) STAINLESS STEEL 304 For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: STAINLESS STEEL 304.

V3 Test Calibration Block (Inch Version) STAINLESS STEEL 316 For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: STAINLESS STEEL 316.

V3 Test Calibration Block (Inch Version) TITANIUM For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: TITANIUM.

V3 Test Calibration Block (Inch Version) ALUMINUM 7075-T6 For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: ALUMINUM 7075-T6

V3 Test Calibration Block (Inch Version) INCONEL 625 For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: INCONEL 625.

V3 Test Calibration Block (Inch Version) MONAL 800 For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Geometry: Includes 1", 2", and 4" radii, (2) 0.12" diameter through holes, engraved reference mark scales, and a 0.02" wide x 0.1" deep slot. Made in accordance with NDEFLAW Drawing No.105455, with design based on prototypes from the. I&T Nardoni Institute in Brescia, Italy. Dimensions: 6" x 3.5" tall x 1" wide. Material: MONAL 800.