Phased Array "Type A" Block IIW-Type (Inch Version) Special Alloy
Phased Array "Type A" Block IIW-Type (Inch Version) Special Alloy Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: Special Alloy
Phased Array "Type A" Block IIW-Type (Inch Version) 1018 Steel
Phased Array "Type A" Block IIW-Type (Inch Version) 1018 Steel Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: 1018 Steel
Phased Array "Type A" Block IIW-Type (Inch Version) STAINLESS STEEL 304
Phased Array "Type A" Block IIW-Type (Inch Version) STAINLESS STEEL 304 Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: STAINLESS STEEL 304
Phased Array "Type A" Block IIW-Type (Inch Version) STAINLESS STEEL 316
Phased Array "Type A" Block IIW-Type (Inch Version) STAINLESS STEEL 316 Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: STAINLESS STEEL 316
Phased Array "Type A" Block IIW-Type (Inch Version) TITANIUM
Phased Array "Type A" Block IIW-Type (Inch Version) TITANIUM Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: TITANIUM
Phased Array "Type A" Block IIW-Type (Inch Version) ALUMINUM 7075-T6
Phased Array "Type A" Block IIW-Type (Inch Version) ALUMINUM 7075-T6 Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: ALUMINUM 7075-T6
Phased Array "Type A" Block IIW-Type (Inch Version) INCONEL 625
Phased Array "Type A" Block IIW-Type (Inch Version) INCONEL 625 Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: INCONEL 625
Phased Array "Type A" Block IIW-Type (Inch Version) MONAL 800
Phased Array "Type A" Block IIW-Type (Inch Version) MONAL 800 Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to an IIW-Type Block, but has specially-engineered for phased array applications. Geometry: 4.000" and 2.000" radii • 19 through holes at .040" diameter • 1 through hole at .080" diameter • 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. • 4 FBHs at .157" diameter x .040", .120", .200", .275" deep. • 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. • 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long. Material: MONAL 800