Multi Method NDT (Metric Version) Kit Mild Carbon Steel The Ultimate NDT Training and Testing Flawed Specimen Kit: • The Kit assist in the training and testing of at least 6 different NDT methods; UT, RT, MT, PT, VT & ET • Kit contains 30 flaws which cover a wide range of pre-service and in-service flaws types. • Great for comparing indication responses of the different NDT methods. Kit Specifications: • Set of 10 Specimens • Specimen Alloy Mild Carbon Steel • Custom Alloys Available Each Specimen will contain 3 flaws • Total of 30 flaws in the Kit. Each specimen contains flaws that are designed to be detectable using multiple NDT methods. Specimen Geometries Include: • (1) Tee, 9.5mm T x 300mm (W) X 250mm (L) x 250mm (H) w/ Double Bevel Weld • (1) Tee, 9.5mm T x 300mm (W) x 250mm (L) x 250mm (H) w/ Single Bevel Weld w/ Backing Bar • (1) Tee, 12.5mm T x 300mm (W) x 250mm (L) x 250mm (H) w/ Double Fillet Weld • (2) Plates, 15mm T x 300mm (W) x 250mm (L) w/ Single V Weld Bevel • (1) Plate, 20mm T x 300mm (W) x 250mm (L) w/ Double V Weld Bevel • (1) Plate, 9.5mm T x 300mm (W) x 250mm (L) w/ Single V Weld Bevel • (1) Plate, 9.5mm T x 300mm (W) x 250mm (L) w/ Single V Weld Bevel w/ Backing Bar • (1) Plate, 12.5mm T x 300mm (W) x 250mm (L) w/ Single V Weld Bevel • (1) Pipe, Ø114mm Sch160 (12.5mm wall) x 250mm w/ Single V Weld Bevel Kit Documentation Includes: • Certificate of Conformance • As Built CAD Drawings • UT Inspection Reports • RT, Digital & Film Radiograph Film and Technician Sheet • Test Sheets (used during technician training and testing)