Crack Sizing Bars for 25mmT (Metric Version)

• Quantity:  Set of 10
• Bar Specifications:

·         Carbon Steel

·         25mm (T) with Single V Groove

·         Bars will be 75mm (W) x 250mm (L)

·         The crowns may be as welded or ground flush–client choice

·         Weld root will be as welded

·         Weld will be located in the center of 250mm bar

·         Each bar will contain a single surface connected “thumbnail”, “straight” or “asymmetrical” shaped crack — client choice

·         The crack ID surface length will span the 75mm width of the bar

·         The crack through wall depths

·         80%, 70%, 60%, 50%, 45%, 40%, 30%, 20%, 10%, 10% and 5%

·         Depths can be adjusted as needed

·         The asymmetrical-shaped cracks may have 2 specified depths

·         The crack locations will vary from HAZ, Centerline, Toe and Root as requested by client

·         Bar sides will be dressed with sharp edges chamfered.

·         Flaw Tolerance +/- 0.080

• Manufacturing Drawings:

·         NDE Flaw Tech will provide the client a set of CAD drawings for their review and approval prior to the start of production.

• Final Documentation:

·         Includes C of C, “As Built” CAD drawings, Measuring & Test Equipment Certificates and Test Sheets