Borescope Inspection Training and Demonstration Flaw Kit (Inch Version) Borescope inspection training and Demonstration flaw kit Pipe OD 1” Sch80 (0.2” wall) Pipe 2 Nos 90° Elbow OD 1.5” Sch80 (0.2” wall) Pipe and Long Radius 90° Elbow connected 8 Nos Specifications: Each specimen will contain a minimum 2 to 4 ID connected flaws. Combination of pre-service and post-service indications. Each specimen will have the elbow end sealed with a 0.625” port to allow borescope access. The pipe end will contain a removable plug for ease of viewing during training and access for larger diameter borescopes. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheet, Measuring & borescope inspection Report Qty: 1 Set of 10 Specimens, Customized Calibration Test Block and Flaw Specimen also available.

Borescope Inspection Training and Demonstration Flaw Kit (Metric Version) Borescope inspection training and Demonstration flaw kit Pipe OD 33mm Sch80 (5 mm wall) Pipe 2 Nos 90° Elbow OD 48mm Sch80 (5mm wall) Pipe and Long Radius 90° Elbow connected 8 Nos Specifications: Each specimen will contain a minimum 2 to 4 ID connected flaws. Combination of pre-service and post-service indications. Each specimen will have the elbow end sealed with a 16mm port to allow borescope access. The pipe end will contain a removable plug for ease of viewing during training and access for larger diameter borescopes. Documentation: NDT Verification Reports, C of C, CAD Drawings and Test Sheet, Measuring & borescope inspection Report Qty: 1 Set of 10 Specimens, Customized Calibration Test Block and Flaw Specimen also available.