No item(s) available in cart.

AWS VT KIT (Inch Version)

AWS STRUCTURAL VT KIT (Inch Version) Carbon Steel

AWS STRUCTURAL VT KIT (Inch Version) Carbon Steel AWS Visual Kit (Based on AWS D1.1) • Kit is designed specifically for VT Weld Inspection. Flaws are designed to be “Border Line” Acceptable or Reject able. • Material: Carbon Steel • Kit contains 10 specimens: • Flaws are randomly placed • (4) Tees 4″ (L) x 6″ (W) x 2″ (H) x 0.25″ (T) • (4) Plates 4″ (L) x 6″ (W) x 0.25″ (T) • (2) Pipe: Ø4” Sch40 (0.25” wall) x 6” (L) • Flaws: at least 2 per specimen, 25 total • Welding Process – SMAW • Document Package Includes: Certificate of Conformance, CAD Drawings & Test Sheets

Cast Specimen Set (Inch)

Cast Specimen Set (Inch) Qty: 1 Set of 8 Specimens Specifications: • Each Cast Specimen Set will contain a mix of 8 aluminum cast specimens. There will be limited specimen geometry duplication. • The specimens are nominal in size and can be held easily in one hand. • Each specimen will contain a variety of visual casting defects and abnormalities. • There is not a standard number of casting defects per specimen. • Each specimen is a unique casting and cannot be duplicated. • NDE Flaw Tech will call out the obvious indications. • The skilled inspector may observe indications not documented by NDE Flaw Tech. Cast Specimen Sets Documentation: • Includes a photograph of each of the 8 specimen’s major surface or side. • Each photograph will include one or more call outs indicating the location of the prominent defect(s). • Each specimen major side will be hard stamped 1A, 1B, 2A, 2B, thru 8A, 8B. Carrying Case Dimensions and Kit Weight: • 38cm x 33cm x 25cm, ~8KGS

“The Traveler” CWI Visual Training Kit (Inch Version)

“The Traveler” CWI Visual Training Kit (Inch Version) NDE Flaw Tech’s new polymer specimen set developed specifically for CWI training and testing. Efficiently designed to provide a maximum number of indications with minimal weight to support the traveling CWI instructor. Kit Specifications: • Material, polyurethane (gray color) • Designed to be very lightweight for ease of transport • 15 specimens, (6) Plates, (3) Tee Joints & (6) 180° Pipe Segments • Flaws / Indications, ~3 to 4 per specimen for a total of 50+ weld indications. • Specimens also contain various weld bevels and flame cut edges • All indications are based on AWS D1.1 • Carrying Case, 1 @ 20” x 18” x 10”; fits all 15 samples • Weight ~11KGS Please note the flaws / indications are intended to be “borderline” acceptable or rejectable. The end user (CWI) must make that determination. Documentation: • Includes Certificate of Conformance, CAD drawings & Test Sheets (Optional: Weld Size and CAM Gauges)

“The Traveler Ⅱ” CWI Visual Training Bend Kit (Inch Version)

“The Traveler Ⅱ” CWI Visual Training Bend Kit (Inch Version) Qty: 1 Kit Specifications: • Material, polyurethane (gray color) • Designed to be very light weight for ease of transport. • 4 specimens, • 2 Side Bend specimens with 4 bends each for a total of 8 Side Bends. • 2 Longitudinal Bend specimens with 4 bends each for a total of 8 Longitudinal Bends. • All welds are a nominal Single V Groove bevel. • Flaws / Indications, each specimen contains approximately ~3 to 5 indications for a total of 15+ indications. Some bends have no flaws. • Please note the flaws / indications are intended to be “borderline” acceptable or rejectable. The end user (CWI) must make that determination. • These specimens can be used in conjunction with the following codes; AWS D1.1 & D1.5, ASME and API weld inspection. • Carrying Case, 1 @ 51cm x 46cm x 25cm • Weight ~10 KGS Documentation: • Includes C of C, CAD drawings & Test Sheets

© 2024 NDE FLAW TECH. All Right Reserved.