AWS STRUCTURAL UT KIT (Inch Version) Carbon Steel Based on AWS D1.8 Annex E For Structural Welds AWS Seismic Supplement for UT Testing Qty: 1 Set of 8 specimens • Material: A36 or 1018 carbon steel • Specifications: Total of 8 Welded Specimens: • 2 Butt Welds w/ V Groove (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 12” (W) • 2 Butt Welds w/ V Groove w/ Backing Bar, (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 12″ (W) • 2 Tee Welds w/ Single Groove, (1) at 0.375” (T) & (1) at 0.75” (T) X 6” (L) X 6” Main X 7” (Branch) • 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) at 0.375” (T) and (1) at 0.75” (T) X 6” (L) X 6” Main X 7” Branch • Flaws: Total of 20 (~2 – 3 per specimen) sub-surface and surface breaking flaws randomly placed throughout the volume of the weld. The flaw sizes will vary from approximately +1” to -0.5” in length and +/- 0.25” in height. • Tolerance: +/- 0.080” • Weld Condition: Surface condition of the crown and root will be “as welded.” • Documentation: Certificate of Conformance, “As Built” CAD, RT Inspection Film and Technique Sheet, UT Inspection Report and Measuring and Test Equipment Certificates

AWS D1.5 UT Bridge Kit (Inch Version) Qty: 1 Specifications: • Set of 8 Specimens • Specimen Alloy: Mild Carbon Steel • Each Specimen will contain 3 flaws • Total of 24 flaws in the Kit. • Flaws that are designed to be detectable using UT (Conventional & PAUT). • Flaws are a specially selected to represent fabrication and in-service indications. Kit Specimen Design and Joint Designations per Figure 2.4 AWS D1.5 Include: • Specimen #1: #B-U3b, Double V Groove Weld-Butt Joint Plate w/ Flush Crowns, 0.75” T x 12” X 12” • Specimen #2: #B-U3b (modified), 2/3-1/3 Double V Groove Weld-Butt Joint Plate w/ Flush Crowns, 1.0” T x 14” x 14” • Specimen #3: #B-U3b, Double V Groove Weld-Butt Joint Thickness Transition w/ Chamfering and Offset Alignment Plate w/ As Welded Crowns, 1.0” to 0.5” T x 12” x 12” • Specimen #4: #B-U2, Single V Groove Weld-Butt Joint Plate w/ Flush Crown & Root, 0.75” T x 12” x 12” • Specimen #5: #TC-U5b, Double Bevel Groove Weld -T-Joint (Flange to Web) w/ As Welded Crowns, 0.75” T x 6” Web to 1” T X 4.5” Flange x 12” (weld length) • Specimen #6: Recommended, Single V Groove – Skewed Joint w/ Back Gouge, 45° Skewed Connection Plate w/ As Welded Crown, 0.5” T x 6” x 6” (weld length) Connection to 0.75” T x 8” x 10” Web • Specimen #7: #B-U3b, Double V Groove Weld-Butt Joint Thickness Transition w/ Chamfering and Centerline Alignment Plate w/ As Welded Crowns, 1.0” to 0.5” T x 12” x 6” (weld length) • Specimen #8: #TC-U4c, Single Bevel Groove Weld-Corner Joint Corner w/ Backing Bar & As Welded Crown, 0.75” T x 6” x 6” Kit Documentation Includes: • Certificate of Conformance • As Built CAD Drawings • UT Inspection Reports • Measuring & Test Equipment Certificates • Test Sheets (used during technician training and testing) Optional Features: (Items not included in the Kit – contact FlawTech for pricing.) • Recommended Optional Plate (not included in the Kit) • Specimen #9: #B-U3b, Double V Groove Weld-Butt Joint Plate. w/ 4 flaws 3.0” T x 30” x 12” (weld length) • Radiography • Digital & Film Radiograph Film and Technique Sheets • Kit Specimens #’s may be purchased individually. • Custom Alloys Available Kit Includes: • Shipping Container(cm): 81cm x 51cm x 53cm • Total Weight ~137KGS