No item(s) available in cart.

AWS PT KIT (Metric Version)

AWS STRUCTURAL PT KIT (Metric Version) Carbon Steel

AWS STRUCTURAL PT KIT (Metric Version) Carbon Steel AWS Penetrant Testing Kit (Based on AWS D1.1) • Kit is designed specifically for PT Weld Inspection. Flaws are designed to be “Border Line” Acceptable or Reject able. • Material: Carbon Steel • Kit contains 10 specimens: • Flaws are randomly placed • (4) Tees 4″ (L) x 6″ (W) x 2″ (H) x 0.25″ (T) • (4) Plates 4″ (L) x 6″ (W) x 0.25″ (T) • (2) Pipe: Ø4” Sch40 (0.25” wall) x 6” (L) • Flaws: at least 2 per specimen, 25 total • Welding Process – SMAW • Document Package Includes: Certificate of Conformance, CAD Drawings & Test Sheets

Cast Specimen Set (Metric)

Cast Specimen Set (Metric) Qty: 1 Set of 8 Specimens Specifications: • Each Cast Specimen Set will contain a mix of 8 aluminum cast specimens. There will be limited specimen geometry duplication. • The specimens are nominal in size and can be held easily in one hand. • Each specimen will contain a variety of visual casting defects and abnormalities. • There is not a standard number of casting defects per specimen. • Each specimen is a unique casting and cannot be duplicated. • NDE Flaw Tech will call out the obvious indications. • The skilled inspector may observe indications not documented by NDE Flaw Tech. Cast Specimen Sets Documentation: • Includes a photograph of each of the 8 specimen’s major surface or side. • Each photograph will include one or more call outs indicating the location of the prominent defect(s). • Each specimen major side will be hard stamped 1A, 1B, 2A, 2B, thru 8A, 8B. Carrying Case Dimensions and Kit Weight: • 38cm x 33cm x 25cm, ~8KGS

AWS / CWI Penetrant Kit (Metric)

AWS / CWI Penetrant Kit (Metric) NDE Flaw Tech worked in conjunction with AWS and EPRI in the development of this kit. This kit has been designed to incorporate both basic penetrant training and testing of the CWI. • AWS / CWI Certified Kit • Material: Carbon Steel • Kit contains 10 Specimens: • (2) Plates: 100mm x 150mm x 6mm • (1) Pipe: 100mm SCH80 x 150mm • (1) Tee: 100mm x 150mm x 50mm x 6mm • (1) Socket Weld: 50mm SCH80 x 150mm • (5) Plates: 25mm x 100mm x 6mm • Flaws: 2+ per specimen • Welding Process: SMAW • Document Package Includes: Certificate of Conformance, “As Built” CAD Drawings & Test Sheets • Weight: ~14KGS • Designed Specifically for PT Weld Inspection Training

© 2024 NDE FLAW TECH. All Right Reserved.