ASTM E2491 Phased Array Assessment Block (Metric Version) Special Alloy

ASTM E2491 Phased Array Assessment Block (Metric Version) is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear/angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities. This block is also referred to as a “Type B” block.

Geometry Dimensions: 150mm x 100mm x 25mm

• Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter.

• Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.

• Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.

• Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes.

• Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.

• Machine engraved tick mark at radii centerline.

Material: Special Alloy