![](https://ndeflawtechnologies.com/images/products.png)
ASME SUPPLEMENT KIT
ASME SUPPLEMENT KIT ASME Boiler and Pressure Vessel Code, Section XI, Appendix VII, Supplement 10 Kit for Dissimilar Metal Welds
![](https://ndeflawtechnologies.com/images/products.png)
ASME UT KIT
ASME UT KIT Kit Specifications: • Material: 4 carbon steel specimens & 4 stainless steel specimens (see detail below) • 8 Piece Specimen Set for Training and Qualification • Contains 20 “Real Flaws”: Each specimen contains two to four “real flaws” designed to meet Appendix VII specifications. • Specimens are manufactured to NDE Flaw Tech’s advanced tolerance of +/- 0.080″. • No two specimens are alike. Buy two set, one for testing and one for training. • Document package includes CAD drawings, Certificates of Conformance, and NDT reports. • Custom options available such as 10% notches, blank specimens, and the purchase of individual flawed specimens. Contact NDEFlawTech for more details.
![](https://ndeflawtechnologies.com/images/products.png)
ASME RT KIT
ASME RT KIT Kit Specifications: • Material: 4 carbon steel specimens & 4 stainless steel specimens (see detail below) • 8 Piece Specimen Set for Training and Qualification • Contains 20 “Real Flaws”: Each specimen contains two to four “real flaws” designed to meet Appendix VII specifications. • Specimens are manufactured to NDE Flaw Tech’s advanced tolerance of +/- 0.080″. • No two specimens are alike. Buy two set, one for testing and one for training. • Document package includes CAD drawings, Certificates of Conformance, and NDT reports. • Custom options available such as 10% notches, blank specimens, and the purchase of individual flawed specimens. Contact NDEFlawTech for more details.
![](https://ndeflawtechnologies.com/images/products.png)
UT Socket Weld Joint Kits
UT Socket Weld Joint Kits Set of 6 Socket Weld specimens designed and recommended for technician practice inspection of vent, drain line, misc. socket welds and balance of plant. • Total of 12 real flaws per set; 2 flaws in each specimen, Fatigue & HAZ Cracks and Lack of Fusions. • Critical Tolerance: +/-0.040″ (1mm) • Doc. Pack Includes: C of C, CAD Drawings, UT Report and Measuring & Test Equipment Certificates • This set may also be purchased in 304SS and 316SS – See below. • You may buy individual specimens separately – Contact us for details.
![](https://ndeflawtechnologies.com/images/products.png)
ASME CORROSION/EROSION FOUR SECTION PLATE
ASME CORROSION/EROSION FOUR SECTION PLATE Corrosion, Erosion, and Lamination UT Thickness Training & Certification Plates Specification: • Plates will be divided into 4 quadrants with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 2 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates
![](https://ndeflawtechnologies.com/images/products.png)
ASME CORROSION/EROSION Sixteen Section Plate
ASME CORROSION/EROSION Sixteen Section Plate Corrosion, Erosion, and Lamination UT Thickness Training & Certification Plates Specification: • Plates will be divided into 16 sections with machined scribe lines with each quadrant identified Alpha/Numerically on plate. • The opposing side (host side) of the plate will host 4 randomly placed simulated corrosion, erosion and/or laminations. • The quadrant selection and indication depth will be selected randomly or selected by the client. • The through wall depths of the indications will vary but the target depths will range from ¼, ½ & ¾ T. • The recorded depth of the corrosion indications will be based on the deepest spot within the field of corrosion. • The side of the carbon plate hosting the indications will be painted with a “Rust-Oleum” type paint to assist in preventing additional corrosion. • The host side of the plate will be covered with a “removable” cover plate Documentation: • Certificate of Conformance, “As Built” CAD and Measuring & Test Equipment Certificates
![](https://ndeflawtechnologies.com/images/products.png)
ASME RT Socket Weld Joint Kits
ASME RT Socket Weld Joint Kits Set of 6 Socket Weld specimens designed and recommended for technician practice inspection of vent, drain line, misc. socket welds and balance of plant. • Kit includes 2 specimens per pipe size • Total of 12 real flaws per set; 2 flaws in each specimen, Fatigue & HAZ Cracks and Lack of Fusions. • Critical Tolerance: +/-0.040″ (1mm) • Doc. Pack Includes: C of C, CAD Drawings, UT Report and Measuring & Test Equipment Certificates • This set may also be purchased in 304SS and 316SS – See below. • You may buy individual specimens separately – Contact us for details.