ASME N-625 Reference Plate (Inch Version) Special Alloy In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: Special Alloy

ASME N-625 Reference Plate (Inch Version) 1018 Steel In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: 1018 Steel

ASME N-625 Reference Plate (Inch Version) STAINLESS STEEL 304 In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: STAINLESS STEEL 304.

ASME N-625 Reference Plate (Inch Version) STAINLESS STEEL 316 In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: STAINLESS STEEL 316.

ASME N-625 Reference Plate (Inch Version) TITANIUM In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: TITANIUM.

ASME N-625 Reference Plate (Inch Version) ALUMINUM 7075-T6 In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: ALUMINUM 7075-T6. Note: For special alloy request by mail.

ASME N-625 Reference Plate (Inch) INCONEL 625 In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: INCONEL 625.

ASME N-625 Reference Plate (Inch Version) MONAL 800 In accordance with ASME 1275N Boiler and Pressure Vessel Code, Section III, Nuclear Vessels. Used for longitudinal, shear, and surface wave sensitivity calibrations. Geometry: Contains six flat-bottom holes: three 4/64” diameter, one each at depths of .050”, .250”, and .500”; one 4/64” diameter at 1.500” deep; one 8/64” diameter at 1.625” deep; and one 16/64” diameter at 1.750” deep. Also contains the calibration notch. Dimensions: 12.000″ x 6.000″ x .500″ Material: MONAL 800.