AIRBUS REFERENCE STANDARD-99D57004000000 (Metric Version)

Airbus Calibration Standard Block Set. A340-200/-300 51-63-03 Pg. 2-3, A300, A300-600, A310, A318/A319/A320/A321, A330, A340, A380 51-34-03, Figure 1 Sheett 1 Pg.1-2. 

BLOCK CONTAINS 3 PLATES

OVERALL DIMENSION - 190mm (L) X 150mm (W)

TOP PLATE THICK - 2mm

MIDDLE PLATE THICK - 12.5mm

BOTTOM PLATE THICK - 2mm

CONTAIN (20) HOLES – Ø6.32mm, 6.75mm, 7.14mm, 7.54mm, 7.94mm, 8.33mm, 8.73mm, 9.13mm, 9.53mm, 9.92mm, 10.32mm, 10.72mm, 11.11mm, 11.51mm, 11.91mm, 12.3mm, 12.7mm, 13.1mm, 13.49mm 13.89mm.

MIDDLE PLATE CONTAIN 2 CORNER NOTCH FOR EACH HOLE

(20) TOP NOTCH - 0.5mm (D) X0.15mm (W)

(20) BOTTOM NOTCH - 0.15mm (D) X 0.15mm (W)

(6) BOLT & NUT DIA -6.5mm

STANDARD/MANUFACTURE REFERENCE/PART NUMBER: 99D57004000000

MATERIAL: 2024-T351 ALUMINUM. 

NOTE: For special alloy request by mail.